S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L

Product Details
Customization: Available
Application: Power, Electronic, Instrument, Lighting
Phase: Three

360° Virtual Tour

Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
16.52 Million USD
Plant Area
35000 square meters
Management System Certification
ISO9001:2015, ISO14001:2015, ISO45001:2018 certificate
  • S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L
  • S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L
  • S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L
  • S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L
  • S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L
  • S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L
Find Similar Products

Basic Info.

Model NO.
S11
Winding Type
Multi-winding Transformer
Certification
ISO9001-2000, ISO9001, CCC
Usage
Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
Frequency Characteristics
High Frequency
Shape of Core
EC
Brand
ABB
Standard
GB/T6451-2008
Control
Scm Control
Delivery
15~20days After Deposit
Iron Core
Crystal Grain-Oriented Silicon-Steel Sheet
Package Size
115.00cm * 75.00cm * 105.00cm
Package Gross Weight
695.000kg
Transport Package
Wooden Case
Specification
30kVA-2500kVA
Trademark
Honle
Origin
Wenzhou, China
HS Code
850433000
Production Capacity
1000PCS Per Month

Product Description

Product Description

S11 160kVA Series Three Phase Oil Immersed Distribution Transformer
S11 160kVA Series Three Phase Oil Immersed Distribution Transformer L

Overview

Iron core:

the iron core is made by crystal grain-oriented silicon-steel sheet; GEORG cross cut shear (made in West Germany) is adopted to cut the silicon-steel sheet with a 45°joint seam;fold the sheet into a multistage roll cross-section to reduce the noise and power consumption.

Coil:
cylinder type for high voltage; cylinder type or foil type for low voltage;this can increase the ability to resist short circuit and strike; and the distribution of magnetic path is more rational.

Oil tank:
the oil tank is made by fine cold-rolled steel sheets; GEORG corrugation oil tank production-line is adopted; to meet environmental needs, then, antiseptic coating material is applied on the surface, which can meet the requirements for petroleum and chemical industry (much oil stain and many chemical substances). In addition, the corrugations not any possess heat radiation function, but also meet the requirement for oil expansion and oil contraction trader normal performance. The iso lation from air guarantees a low aging speed of oil and a long life expectancy of transformer.

Insulation structure:
oil-immersed distribution transformer adopts A-level insulation structure; high voltage coil and low voltage coil are concentric; the space between coils is cardboard sleeve small oil clearance oil partition structure.


Product specification

Core
1
Power transformer  core is made of high-permeable grain-orientated top quality cold-rolled

silicon sheet

2

The material is cut with advanced Germany Geoge GmbH automatic shear line with the

cut burrs controlled within 0.02mm.

3

Power transformer  silicon sheet fabrication adopts "no-upper yoke-lapped' technology

and all lapped joints of the silicon sheet are 45 full-miters

4
Effectively improves no-load performance and reduces noises.
 
Coil 1
The high-voltage(HV) coil adopts an interleaved-continuous structure to improve

the voltage characteristics under impact voltage and make voltage evenly distributed.

2
All stays and pads are chamfered to keep highly reliable insulation.
Oil tank and accessories 1 Power transformer tank wall adopts wide steel sheet
2 Which will be folded into corrugated structure without splicing
3 In this way welds aredecreased and mechanical strength is enhanced
4 The corrugated wall has diverging effect, and thus plays arole in decrease of noise.
 
 

Technical Parameters
Rated
Capacity
Voltage
Combination
Vector
Group
No-load
Loss
Load
Loss
No-load
Current
Impedance
Voltage
Total
Weight
Exterior
Size
Installation center
/Installation hole
(kVA) High
voltage
Tap
range
Low
voltage
(kV)
  (W) (W) (%) (%) (kg) (L*W*H)(mm) (mm)
30 6
6.3
10
10.5
11
±5%
or
±2*2.5%
0.4 Ydn0
or
Dyn11
100 630/600 1.8 4.0 335 1030*690*860 400*400/4*φ14
50 130 910/870 1.6 410 1045*700*925 400*400/4*φ14
63 150 1090/1040 1.5 460 1075*710*940 400*400/4*φ14
80 180 1310/1250 1.4 490 1080*715*995 400*400/4*φ19
100 200 1580/1500 1.3 550 1110*730*1020 400*400(550)/4*φ19
125 240 1890/1800 1.2 615 1135*740*1035 400*400(550)/4*φ19
160 280 2310/2200 1.1 695 1155*755*1050 550*550/4*φ19
200 340 2730/2600 1 790 1200*770*1075 550*550/4*φ19
250 400 3200/3050 0.9 930 1240*800*1100 550*550/4*φ19
315 480 3830/3650 0.8 1110 1305*840*1120 550*550/4*φ19
400 570 4520/4300 0.7 1290 1390*900*1160 660*660/4*φ19
500 680 5410/5150 0.7 1510 1500*990*1195 660*660/4*φ19
630 810 6200 0.6 4.5 1730 1580*1030*1305 660*660/4*φ19
800 980 7500 0.6 2075 1705*1140*1360 820*820/4*φ19
1000 1150 10300 0.5 2490 1730*1290*1395 820*820/4*φ19
1250 1360 12000 0.4 2960 1780*1320*1480 820*820/4*φ19
1600 1640 14500 0.4 3515 1890*1430*1520 820*820/4*φ19
2000 1940 18300 0.4 5 4880 2050*1360*1840 820*820/4*φ19
2500 2290 21200 0.4 6010 2170*1430*2015 1070*1070/4*φ19


About Company
S11 160kVA Series Three Phase Oil Immersed Distribution Transformer LS11 160kVA Series Three Phase Oil Immersed Distribution Transformer LS11 160kVA Series Three Phase Oil Immersed Distribution Transformer LS11 160kVA Series Three Phase Oil Immersed Distribution Transformer LS11 160kVA Series Three Phase Oil Immersed Distribution Transformer LS11 160kVA Series Three Phase Oil Immersed Distribution Transformer L

FAQ
Q 1.Where is your market?
A. Our products are popular in North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western European so on. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutual benefit from our cooperation.

Q 2. Can your factory produce according to customers' requirements?
A. Yes, we can produce different products according to customers' requirements.

Q 3. What's the payment terms?
A. We accept LC, T/T, D/P, Western Union PayPal. If others, we can discuss.

Q 4. How's the delivery time?
A. Usually it will take about 30 days after order confirmed.

Q 5.Could you offer Form A or CIO?
A. No problem. We can prepare relative documents to origin affairs office or other office to apply for related certificates.

Q 6.Would you accept to use our logo ?
A. If good quantity, it absolute no problem to do OEM.

Q 7: Are you a manufacturer or trading company?
A: We are a manufacturer with many years of manufacturering experience.

Q 8:What kind of certificates you have?
A:Our company already achieve ISO9001, and for products, we have CE, ISO9001, ISO14001 and so on.

Q 9: How long have you been worked in the electric industry?
A: We have been worked in the electric industry for more than 20 years. We have own research and development department that has 15 engineering technicians.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier