S11 160kVA Series Three Phase Oil Immersed Distribution Transformer

• Customization: Available
• Application: Power, Electronic, Instrument, Lighting
• Phase: Three
• Model NO.: S11
• Cooling Method: Oil-immersed Type Transformer
• Winding Type: Multi-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: High Frequency
• Shape of Core: EC
• Brand: Honle
• Standard: GB/T6451-2008
• Delivery: 15~20days After Deposit
• Control: Scm Control
• Iron Core: Crystal Grain-Oriented Silicon-Steel Sheet
• Transport Package: Wooden Case
• Specification: 30kVA-2500kVA
• Trademark: Honle
• Origin: Wenzhou, Zhejiang
• HS Code: 8504330000
• Production Capacity: 1000PCS Per Month
• Package Size: 115.00cm * 75.00cm * 105.00cm
• Package Gross Weight: 695.000kg

Product Description

S11 160kVA Series Three Phase Oil Immersed Distribution Transformer


Overview

Iron core:
the iron core is made by crystal grain-oriented silicon-steel sheet; GEORG cross cut shear (made in West Germany) is adopted to cut the silicon-steel sheet with a 45°joint seam;fold the sheet into a multistage roll cross-section to reduce the noise and power consumption.

Coil:
cylinder type for high voltage; cylinder type or foil type for low voltage;this can increase the ability to resist short circuit and strike; and the distribution of magnetic path is more rational.

Oil tank:
the oil tank is made by fine cold-rolled steel sheets; GEORG corrugation oil tank production-line is adopted; to meet environmental needs, then, antiseptic coating material is applied on the surface, which can meet the requirements for petroleum and chemical industry (much oil stain and many chemical substances). In addition, the corrugations not any possess heat radiation function, but also meet the requirement for oil expansion and oil contraction trader normal performance. The iso lation from air guarantees a low aging speed of oil and a long life expectancy of transformer.

Insulation structure:
oil-immersed distribution transformer adopts A-level insulation structure; high voltage coil and low voltage coil are concentric; the space between coils is cardboard sleeve small oil clearance oil partition structure.


Product specification

Core	1	Power transformer  core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet
	2	The material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burrs controlled within 0.02mm.
	3	Power transformer  silicon sheet fabrication adopts "no-upper yoke-lapped' technology and all lapped joints of the silicon sheet are 45 full-miters
	4	Effectively improves no-load performance and reduces noises.

Coil	1	The high-voltage(HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed.
	2	All stays and pads are chamfered to keep highly reliable insulation.
Oil tank and accessories	1	Power transformer tank wall adopts wide steel sheet
	2	Which will be folded into corrugated structure without splicing
	3	In this way welds aredecreased and mechanical strength is enhanced
	4	The corrugated wall has diverging effect, and thus plays arole in decrease of noise.

 

Technical Parameters

Rated Capacity	Voltage Combination			Vector Group	No-load Loss	Load Loss	No-load Current	Impedance Voltage	Total Weight	Exterior Size	Installation center /Installation hole
(kVA)	High voltage	Tap range	Low voltage (kV)		(W)	(W)	(%)	(%)	(kg)	(L*W*H)(mm)	(mm)
30	6 6.3 10 10.5 11	±5% or ±2*2.5%	0.4	Ydn0 or Dyn11	100	630/600	1.8	4.0	335	1030*690*860	400*400/4*φ14
50					130	910/870	1.6		410	1045*700*925	400*400/4*φ14
63					150	1090/1040	1.5		460	1075*710*940	400*400/4*φ14
80					180	1310/1250	1.4		490	1080*715*995	400*400/4*φ19
100					200	1580/1500	1.3		550	1110*730*1020	400*400(550)/4*φ19
125					240	1890/1800	1.2		615	1135*740*1035	400*400(550)/4*φ19
160					280	2310/2200	1.1		695	1155*755*1050	550*550/4*φ19
200					340	2730/2600	1		790	1200*770*1075	550*550/4*φ19
250					400	3200/3050	0.9		930	1240*800*1100	550*550/4*φ19
315					480	3830/3650	0.8		1110	1305*840*1120	550*550/4*φ19
400					570	4520/4300	0.7		1290	1390*900*1160	660*660/4*φ19
500					680	5410/5150	0.7		1510	1500*990*1195	660*660/4*φ19
630					810	6200	0.6	4.5	1730	1580*1030*1305	660*660/4*φ19
800					980	7500	0.6		2075	1705*1140*1360	820*820/4*φ19
1000					1150	10300	0.5		2490	1730*1290*1395	820*820/4*φ19
1250					1360	12000	0.4		2960	1780*1320*1480	820*820/4*φ19
1600					1640	14500	0.4		3515	1890*1430*1520	820*820/4*φ19
2000					1940	18300	0.4	5	4880	2050*1360*1840	820*820/4*φ19
2500					2290	21200	0.4		6010	2170*1430*2015	1070*1070/4*φ19

About Company


FAQ
Q 1.Where is your market?
A. Our products are popular in North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western European so on. Some of them are our regular customers and some of them are developing. We hope you can join us and make mutual benefit from our cooperation.

Q 2. Can your factory produce according to customers' requirements?
A. Yes, we can produce different products according to customers' requirements.

Q 3. What's the payment terms?
A. We accept LC, T/T, D/P, Western Union PayPal. If others, we can discuss.

Q 4. How's the delivery time?
A. Usually it will take about 30 days after order confirmed.

Q 5.Could you offer Form A or CIO?
A. No problem. We can prepare relative documents to origin affairs office or other office to apply for related certificates.

Q 6.Would you accept to use our logo ?
A. If good quantity, it absolute no problem to do OEM.

Q 7: Are you a manufacturer or trading company?
A: We are a manufacturer with many years of manufacturering experience.

Q 8:What kind of certificates you have?
A:Our company already achieve ISO9001, and for products, we have CE, ISO9001, ISO14001 and so on.

Q 9: How long have you been worked in the electric industry?
A: We have been worked in the electric industry for more than 20 years. We have own research and development department that has 15 engineering technicians.