S9-M 6-10kv Double Winding Non Excitation Voltage Regulating Fully Sealed Oil Immersed Distribution Transformer

• Application: Power
• Phase: Three
• Core: Core-type Transformer
• Cooling Method: Oil-immersed Type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001-2000, CCC
• Model NO.: S9-M
• Usage: Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: High Frequency
• Shape of Core: Ring
• Transport Package: Export Standard Packing
• Trademark: HONLE
• Origin: China
• HS Code: 8504401990
• Production Capacity: 200PCS Per Month

Product Description

IRON CORE

The core is made of cold rolled silicon steel sheet with high magnetic conductivity grain orientation. The iron core is a core type iron core and a full inclined joint integral iron core. The iron core column is a circular section of multi-level steps, and the iron yoke and the iron core are of equal section.

 

Product Description

It is applicable to the power system with AC 50Hz and rated working voltage of 10kV and below. It is used as the distribution transformer in petroleum, metallurgy, chemical industry, textile, light industry and other enterprises and places with large dust.

Transformer oil tank

1.The transformer oil tank is composed of corrugated wall, and the surface is sprayed with dust and the paint film is firm. Corrugated heat sink not only has cooling function, but also has "breathing" function. The elasticity of corrugated heat sink can compensate the change of transformer oil volume caused by temperature rise and fall. Therefore, the fully sealed transformer has no oil conservator, which reduces the overall height of the transformer.
2.When the transformer is packaged, the vacuum oil filling process is adopted to completely remove the moisture in the transformer, and the transformer oil does not contact with the air. It can effectively prevent oxygen and moisture from invading the transformer, resulting in the decline of transformer insulation performance and the aging of transformer oil, and improve the reliability of transformer operation.

Measurement device

1.All transformers are equipped with tube sockets of glass thermometer, which are set at the top of the oil tank and extend into the oil for 120 ± 10mm.
2.The 1000 ~ 2000kVA transformer is equipped with outdoor signal thermometer.

Protection device

1.Transformers in all capacity sections are equipped with pressure relief valves.
2.Gas relays with alarm and trip terminals can be installed according to user requirements.

Winding

The winding adopts corrugated oil duct, no paint dipping process, and binding with tightening belt; The windings are concentric coils: the high-voltage winding has taps corresponding to the tap voltage requirements, which are led to the tap switch. The switch is installed on the box cover and the tap voltage can be changed only after the power supply is cut off.
 

Outline installation dimension

 

Rated capacity	Installation dimension(mm)
(KVA)	L	W	H	C1	C2
30	755	655	945	400	400
50	825	665	985	400	400
63	840	675	1000	400	400
80	1020	665	995	400	400
100	1220	750	1015	400	400
125	1260	870	1035	550	550
160	1240	830	1055	550	550
200	1428	1008	1080	660	660
250	1238	818	1123	660	660
315	1380	930	1175	660	660
400	1390	935	1225	660	660
500	1430	970	1230	660	660
630	1550	990	1240	820	820
800	1640	1140	1379	820	820
1000	1830	1320	1400	820	820
1250	1910	1130	1650	820	820
1600	2010	1220	1740	820	820
2000	2120	1280	1780	820	820

 

Main technical parameters

 

Rated capacity	Voltage combination			Connection group	Loss (KW)		No-load current	Short-circuit impedance	Weight(kg)
(KVA)	HV(KV)	High-voltage tapping range	LV(KV)	Symbol	No-load	On-load	(%)	(%)	Oil weight	Gross weight
30	6 6.3 10 10.5 11	±5%	0.4	Dyn11 Yzn11 Yyn0	0.13	O.63/o.60	2.3	4.0	75	295
50					0.17	0.91/0.87	2.0		88	395
63					0.20	1.09/1.04	1.9		95	420
80					0.25	1.31/1.25	1.9		103	480
100					0.29	1.58/1.50	1.8		115	540
125					0.34	1.89/1.80	1.7		130	645
160					0.40	2.31/2.20	1.6		145	740
200					0.48	2.73/2.60	1.5		175	885
250					0.56	3.20/3.05	1.4		195	1010
315					0.67	3.83/3.65	1.4		230	1205
400					0.80	4.52/4.30	1.3		255	1375
500					0.96	5.41/5.51	1.2		285	1620
630				Dyn11 Yyn0	1.20	6.20	1.1	4.5	350	1960
800					1.40	7.50	1.0		405	2310
1000					1.70	10.30	1.0		490	2690
1250					1.95	12.00	0.9		550	3315
1600					2.40	14.50	O.8		625	3985