9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L

Product Details
Customization: Available
Type: Power Source Arrester
Structure: Zinc Oxide Arrester

360° Virtual Tour

Diamond Member Since 2014

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
16.52 Million USD
Plant Area
35000 square meters
Management System Certification
ISO9001:2015, ISO14001:2015, ISO45001:2018 certificate
  • 9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
  • 9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
  • 9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
  • 9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
  • 9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
  • 9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
Find Similar Products

Basic Info.

Model NO.
YH5W
Installation
Parallel Arrester
Application
AC/DC System
Size
Meidum
Operation Voltage
High Voltage
Shape
Gyro Type
Material
ZnO
Certification
ISO9001, CCC
Voltage
3-36kv
Housing
Silicone Rubber
Trademark
Honle
Origin
Wenzhou, China
Production Capacity
50000PCS/Year

Product Description

Product Description

 
9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
 
9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L
Products Introduction:
 

A surge arrester is an over-voltage limiter that protects power transmission and transformation equipment (transformers, switches, capacitors, wave blocks, transformers, generators, motors, power cables, etc.) from overvoltage damage.It is a power system.The basis of insulation coordination.
 
The metal oxide arrester with the disconnector composite jacket is equipped with a special insulating plate and mounting bracket.The bolt on the disconnector is directly connected to the bottom of the arrester, and the lower bolt of the disconnector is connected to the ground wire.The purpose of the arrester disconnector is that when the arrester is damaged under abnormal conditions, the power frequency short-circuit current causes the disconnector to act, and the grounding end of the disconnector is automatically disengaged, so that the faulty arrester is separated from the system, and the fault arrester needs to be replaced.To achieve this, the disconnector must have fast acting characteristics and withstand specified current surge and action load capabilities.

 

Normal operating conditions:

1.Ambient temperature :-40ºC~+40ºC;

2.Radiation of sunlight:Note:The influence of the maximum sun exposure (1.1 KW / square meter) has been considered by the method of preheating the sample in the type test.If there is other heat source near the arrester, the use of the arrester needs to be negotiated by both parties..

3.Altitude:≤1000m;

4.Frequency:48Hz~62Hz;

5.The power frequency voltage applied between the terminals of the arrester for a long time shall not exceed the continuous operating voltage of the arrester;

6.Earthquake intensity below 7 degrees;

Features:

1. Small size, light weight, collision resistance, no loss of transportation, flexible installation, especially suitable for use in switch cabinets;

2. Special structure, integral molding, no air gap, good sealing performance, moisture proof and explosion proof;

3. Large creepage distance, good water absorption , strong pollution resistance, stable performance, and the operation and maintenance are reduced;

4. Uniquely formulated zinc oxide resistors, high capacity, low leakage;

5. The actual DC reference voltage, square wave flow capacity and high current withstand capability are higher than the national standard.


Technical Parameters:

 
Type MOA Rated Voltage MCOV Current Impulse Residual Voltage 2ms Rectangular Current Impulse Withstand 4/10μs High Current Impulse Withstand
1/4μs Lightning Current Impulse 8/20μs Lightning Current Impulse 30/60μs Switching Current Impulse
KV(rms) KV(rms) KV(crest) KV(crest) KV(crest) KV(crest) KV(crest)
YH5W-3 3 2.55 11.3 9 8.9 150 65
YH5W-6 6 5.1 22.6 18 16.8 150 65
YH5W-9 9 7.65 33.7 27 23.8 150 65
YH5W-10 10 8.4 36 30 23 150 65
YH5W-11 11 9.4 40 33 30 150 65
YH5W-12 12 10.2 42.2 36 27 150 65
YH5W-15 15 12.7 51 45 38.5 150 65
YH5W-18 18 15.3 61.5 54 46.2 150 65
YH5W-21 21 17 71.8 63 54.2 150 65
YH5W-24 24 19.5 82 72 62 150 65
YH5W-27 27 22 92 81 69.8 150 65
YH5W-30 30 24.4 102 90 79 150 65
YH5W-33 33 27.5 112 99 86.7 150 65
YH5W-36 36 29 123 108 92.4 150 65
YH10W-3 3 2.55 11.3 9 8.9 250 100
YH10W-6 6 5.1 22.6 18 16.8 250 100
YH10W-9 9 7.65 33.7 27 23.8 250 100
YH10W-10 10 8.4 36 30 23 250 100
YH10W-11 11 9.4 40 33 30 250 100
YH10W-12 12 10.2 42.2 36 27 250 100
YH10W-15 15 12.7 51 45 38.5 250 100
YH10W-18 18 15.3 61.5 54 46.2 250 100
YH10W-21 21 17 71.8 63 54.2 250 100
YH10W-24 24 19.5 82 72 62 250 100
YH10W-27 27 22 92 81 69.8 250 100
YH10W-30 30 24.4 102 90 79 250 100
YH10W-33 33 27.5 112 99 86.7 250 100
YH10W-36 36 29 123 108 92.4 250 100

9kv Protector Polymer Housing Type Metal-Oxid Lightning Surge Arrester L

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier