Hl-Jdj2 – 35 (38.5) Modeloutdoor Oil-Immersed Potential Transformer

• Customization: Available
• Application: Oil Immerised
• Type: Voltage Transformer
• Model NO.: JDJ2-35
• Operation Condition: Outdoor
• Usage: Protection, Measurement
• Winding Form: Multilayer Honeycomb Type
• Insulating Medium: Insulating Oil
• Installation: Active Type
• Magnetic Circuit Structure: Combined Type
• Voltage Transformation Principle: Photoelectric Type
• Transport Package: Standard Export Package
• Specification: CE
• Trademark: HONLE
• Origin: Zhejiang, China
• HS Code: 8504301100
• Production Capacity: 50000PCS Per Month

Product Description

JDJ(J)₂-35(38.5) Model Oil-immersed Type Potential Transformer

1.General Summary:
JDJ₂-35(38.5) model Potential Transformer is one-phase double-winding,oil-impregnated type outside product, suitable to be used at A.C.50Hz power line with rated voltage 35(38.5)KV for voltage & energy measuring and relay protection of associated equipments.
This model potential Transformer is suitable for power line of single-phase and three-phase. When it is used in three-phase power line, two potential transformers can be connected to be "V" line, see wiring drawing1&2.
JDJJ₂-35(38.5) model potential transformer is an outside type single-phase three winding oil-impregnated product, applicable to be used at A.C.50Hz power line with rated voltage 35(38.5)KV which neutral point non-directly earthing for voltage & energy measuring and relay protection and power-supply of signal device.
First winding of This model potential transformer is used for neutral point earthing, so insulation level of two side of winding is different, power line side(A side) is completely insulated, and earthind side(X side) is imcompletely insulated, A side is fetched out by 35(38.5)KV porcelain sleeve, X side is fetched out by 0.5KV porcelain sleeve, second winding and residual voltage winding is fetched out by 0.5KV porcelain sleeve respectively.
This model potential transformer can withstand over-voltage caused one phase earthing without damage. This model potential transformer must be used at three whole set ,see its winding wiring diagram 3

2. Structure Brief Introduction:
JDJ₂-35 model potential transformer is made of silicon-steel piece type fold three-core pole type for its iron core. Second winding and first winding at middle pole. Second winding wind in insulation canister, first winding sub-sect symmetrically, wind in another insulation canister, two side of winding has static ring, outer-surface of head & end has static shield. Two winding is multi-layer cylinder type, first winding covers second winding, there's oil path between windings.
Machine is fastened at the oil-box cover by nip tool, box cover is equipped with oiling stuff and oil tank. Top of oil tank has breathing-hole stuff, bottom is equipped with oil stuff, its side is equipped with panel oil-meter, oil tank's cliff is equipped with earthing bolt and oiling stuff, box bottom is welded with bracket which has four installation hole.
3. Technical Data:

• Rated insulation level: 40.5/95/185KV;
• Product standard: IEC-60044-2, IEC186, GB1207-1997 (Potential transformer);
• Environental Temp.: Lowest temp.-30ºC,highest temp.40ºC,daily average temp. no exceed 30ºC;
• Creeping distance of surface meet class2 pollution requirements;
• Other technical data see below table:

 

Product Model	Rated voltage Ratio (KV)	Accuracy class & rated output(VA)				Residual winding accuracy class & rated output (VA)		Frequency (Hz)	Ultimate Output (VA)	Creeping distance of porcelain sleeve (mm)	Oil weight/ Total weight (kg)
		0.2	0.5	1	3 or 3P	3P	6P
JDJ2-35	35/0.1	80	150	250	500	--	--	50	1000	800	20.5/115
JDJ2-35	38.5(22)/0.22	-	80	150	250	-	-	50	100	800	20.5/115
JDJJ2-35	35/√3-- 0.1/√3-	80	150	250	500	--	100	50	1000	800	18/100

4.OUR FACTORY