D10-M Series Effective Single Phase Oil Immersed Distribution Transformer

• Customization: Available
• Application: Power, Electronic, Instrument, Lighting
• Phase: Single
• Model NO.: D10-M
• Cooling Method: Oil-immersed Type Transformer
• Winding Type: Separated Winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: Ring
• Brand: Honle
• Size: Medium
• Weight: 294kg
• Transport Package: Standard Export Packing
• Trademark: HONLE
• Origin: Zhengjiang, China
• HS Code: 8502390000
• Production Capacity: 1100 Pieces Per Year
• Package Size: 60.00cm * 43.00cm * 90.00cm
• Package Gross Weight: 135.000kg

Product Description

D10-M Series Effective Single Phase Oil Immersed Distribution Transformer

Overview

Iron core:

Effectively upgrade transformer's no-load performance by below methods:

1) The core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet and the material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burs controlled within 0.02mm.

2) The silicon sheet fabrication adopts "no-upper yoke lapped" technology and all lapped joints of the silicon sheet are 45 full-miters. The laminated core sheets are integrally pressed and adhered with epoxy resin to make the three leg two-yoke core a strong and flat integral one with good verticality precision, this effectively improves no-load performance and reduces noises.

Winding:
1) The high-voltage (HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. All stays and pads are chamfered to keep highly reliable insulation.

2) In the transformer winding there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation. The HV and MV regulation system are independently provided with voltage-regulating winding to balance the ampere turn of each winding, effectively lower the axial electrodynamic force generated at short-circuit of transformer and improve abrupt short-circuit withstanding capacity.

Oil tank and accessories:
1) The tank wall adopts wide steel sheet, which will be folded into corrugated structure without splicing, in this way welds are decreased and mechanical strength is enhanced, meanwhile, the corrugated wall has diverging effect, and thus plays a role in decrease of noise. The routing troughs and control cabinets of the secondary circuit are all made of stainless steel, so the entire transformer has a simple and good looking.

2) All sealing surface use quality sealing material and are precision-machined.

Technical Parameters
 

Rated Capacity	Voltage Ratio(KV)		Vector Group	Impedance	Losses		No-load Current	Weight			Dimension
(kVA)	HV	LV			No load	Load	(%)	Machine weight	Oil	Gross	(L*W*H)
5	11 10.5 10 6.3 6	0.22 0.24	Lio li6	3.5	35	145	4	50	40	130	530*450*850
10					55	260	3.5	65	40	150	560*450*870
16					65	365	3.2	80	40	180	600*450*920
20					80	430	3.0	100	50	205	620*450*940
30					100	325	2.5	115	50	225	700*450*980
40					125	775	2.5	150	55	270	700*480*1040
50					150	950	2.3	175	70	310	650*510*1100
63					180	1135	2.1	190	80	340	660*520*1100
80					200	1400	2.0	240	100	420	770*530*1120
100					240	1650	1.9	295	100	490	840*600*1150
125					285	1950	1.8	370	110	560	890*740*1160
160					365	2365	1.7	430	130	650	950*790*1170

Note:Tapping range of high voltage: ±5%, ±2*2.5%; Frequency 50Hz
 

Rated Capacity	Voltage Ratio(KV)	Tapping Range	LV	Losses		Weight
(kVA)	High voltage	(%)	(KV)	No load	Full load Loss	Oil	Gross
15	33/19 30/17.3 13.2/7.62 11/6.35	±2*2.5%; Or other	0.12 0.24 0.48 or 0.12- 0.24 0.24- 0.48	0.03	0.195	45	294
25				0.05	0.4	68	362
37.5				0.65	0.5	75	476
50				0.8	0.6	93	553
75				0.12	0.88	132	672
100				0.21	1.12	141	742
167				0.35	1.41	207	952
250				0.5	2.0	375	1386

 
 

Workshop Image

Workshop Image




 

Company Profile

Company Profile

Last but not Least

Dear friends, we are your Reliable Partner!

We appreciate if you leave detailed requirements here or send emails to our mail box.

We will get back to you as soon as possible. Thanks very much.

It's our honor to have the opportunity to work with you.